A "Cart jam" error message in 123 hp com oj4650 is a printer problem identified with the cart that contains the ink cartridges. This may be due to a previous printing error, for example, a paper jam or an external article jammed during a printing session.
How to explain the error of Carriage Jam?
Step 1:
Mood kills the printer and let it stand for 60 seconds at that point, turn it on once more. Hold until the printer is ready at that time, run a test print.
Step 2:
- The mood kills the printer and ejects all the papers in the paper plate.
- Turn on the printer. While it is still on, eject the force chain on the back of the printer.
- Open the paper roll inlet extension and evacuate the jammed paper. Make sure there are no pieces of paper or external elements in the paper rollers.
- Replace the power cord and turn on the printer.
- Run a print test.
Step 3:
- Unplug the power chain.
- Open the cartridge carriage and check for paper jams or remote items.
- Move the ink carriage and check if it can move without inhibitions.
- Make sure there are no obstacles.
- Adjusting the force line again.
- Run the print test.
Step 4:
- Open the top to reach the printer's car. Make sure you stop moving completely.
- Evacuate the ink cartridges. Be sure not to contact the print heads.
- Move the cartridge carriage from side to side to check if there is any deterrent.
- Reinstall the ink cartridges in your right shadier carriage.
- Run a print test.
The solution of the HP 4650 Printer Carriage Jam should be possible using the above provisions. In the event that none of these arrangements work, you can perform a complete reset or contact the printer professional.